Showing 5 ideas for tag "IoT"

City of Calgary Mayor's Innovation Challenge

AI, Sustainable Transport, and Low-Cost Rewards/Credits & Solar

In March 2016, Process Ecology published an article by Process/R&D Engineer Samaneh Hajipour titled "New Alberta Climate Change Policy: A Summary" that outlines the policies needed to reduce greenhouse gases (GHG) emissions, including the reduction of coal and oil, and increase the use of natural gas and renewable energy [1]. According to the Alberta Climate Change Advisory Panel, "carbon pricing is the most flexible... more »

Voting

Awaiting Votes
Idea Submission

Phase 3 Share your ideas! (Completed) March 19 - April 2

Attach IoT sensors to gather and analyze big data on COC Bridges

Since the construction of the first Calgary bridge in 1888, The City and its surrounding area have had built over seventy-five pedestrian, vehicle and rail bridges. Based on the wide distribution of these infrastructures throughout The City, it provides multiple opportunities to not only gather valuable data to monitor bridge health (the load on the bridge and vibrations), but also water flow forces (pressure of the water... more »
Why is this an ambitious idea?

With the load that bridges bear, the particularly tough Calgary climate due to the freeze-thaw conditions and particularly with bridges usually built over water, you will get heaving and concrete will crack more so than other concrete infrastructures. In the past structural health monitoring (SHM) was a very manual process. We have now new opportunities for our society to co-exist and interact with smart interconnected devices that are known as the Internet of Things (IoT), but unfortunately, most of the existing SHM systems are not connected to IoT. This is now an opportunity to build a digital model of the selected bridges in real time by transferring the data by longer range, lower power connectivity products like Wi-Fi HaLow locally for testing and calibration. So, not only would bridge health be monitored, but a dual opportunity to predicting and analyzing climate change impacts and quantifying natural variability are available. This additional benefit may be of greater importance since it involves more than bridges and affects a city in many other areas of concern.

How do we measure the effectiveness of this idea?

The bridge data would be sent to maintenance crews and engineer/scientists using web-based interfaces to view and analyze the collected data in real-time using evaluation algorithms. As for climate data, it could be used for detecting temporal trends; providing information that will allow for a better understanding of the relationships between biological, thermal, and hydrologic data. These would allow The City to understand how the natural system has behaved by comparing historical data with a more precise local IoT sensor readings. This data would provide The City information on how the natural systems are changing from historical trends by maintaining monitoring systems that inform locally specific climate and hydrological model outputs. Using business intelligence and analytics, The City would then be able to determine and plan for those climate impacts that has the highest probability of occurring.

How is this idea attainable through the use of technology or data?

As mentioned in this pages three previous boxes, this can be accomplished by using current technology that allows the ability to gather large amount of data by using tools such as the Internet of Things (IoT) and incorporating longer range, lower power connectivity through products incorporating IEEE 802.11ah devices. This would be then sent to maintenance crews and engineer/scientists using web-based interfaces to view and analyze the collected data in real-time using evaluation algorithms. This same data for climate change would involve more use of Business Intelligence, Analytics and Data Modelling to determine trends and impacts.

Voting

Awaiting Votes
Your Ideas

Phase 2 (Concluded) Log in and Rate the challenges: Mar 5-16

Temperature, Wind and Pollution Modelling and Monitoring Grid

Establish a city-wide network of sensors that continuously report wind, temperature, humidity, pressure and pollution (CO2, CO, N2S, O3) levels to a public data archive. Hundreds of these sensors would be installed across all city neighbourhoods and at various heights downtown to create a public, live and historic 24x7x365 super-density 3D model of Calgary's environment and climate.

What will change for Calgarians if we solve this problem? (Measurable)

"The results of collecting environmental data at this resolution will provide an ever-growing dataset that will enable an enormous amount of data-backed analysis and work optimization that simply isn't possible today. For example, climate scientists can build data models of how weather varies across the city. These models will empower both public and private organizations to optimize both public services and private business endeavours.

City workers will be able to efficiently and effectively water city parks where and when its most needed. Winter snow ploughs can be dispatched to where snow is deepest and snow fences can be planned and set up where its snowy and windiest. New public parks, playgrounds and outdoor ice rinks can be placed where wind and weather is most favourable. The wind impact of new highrise buildings can be more accurately modeled and predicted based on real data, thereby minimizing negative impacts on surrounding communities.

Wind doesn't just move in one direction, it is a dynamic fluid that makes responding to airborne threats almost impossible. With the implementation of a high-density, live model of wind movement, emergency services will be able to immediately know where dangerous fumes and smoke is located and moving to when fires and disaster strikes (remember the Hub Oil fire?). Air polluters who use the cover of darkness to avoid detection will no longer be able poison our environment undetected.

Weather forecasters will be able to improve their predictions of weather both in and around the city and city planners will be able to better understand and measure the effect and intensity of heat islands and cold canyons around the variety of proposed urban designs, thereby being able to avoid such outcomes in the future.

The data repository will provide a new and novel resource for commercial application against a wide variety of challenges. This will help to create new economic opportunities for Calgarians, further strengthening and diversifying our economy away from our historical dependence on the oil and gas sector."

How could we make it happen with technology or data? (Attainable)

This suggestion is all about technology and data. I am suggesting the creation of a network of hundreds of sensors to be placed all over the city of Calgary to report on wind, temperature, humidity, barometric pressure and pollution levels of common urban pollutants like CO2, CO, N2S and O3. These sensors would provide a constant stream of live and historic, publicly accessible data for use by both government and private industry in the provision and optimization of public services and private industry invention.

Assessment
Awaiting Assessments
Assess
Reviews

Phase 3 Share your ideas! (Completed) March 19 - April 2

autonomous-vehicule transportation network

This is a call to action to make happen the 'driver-less Uber' concept by getting buy-in by a big part of members of society to commit to reduce the need for vehicle ownership by implementing an open full-fledge vast autonomous-vehicle transportation network. Manufacturers/dealerships would commit to provide the vehicles with a guaranteed minimum amount of use by consumers. There would be diverse type of vehicles. Businesses... more »
Why is this an ambitious idea?

Such level of engagement and encompassment would requires city-level coordination and support.

How do we measure the effectiveness of this idea?

Getting the minimum registration required in the network by both consumers and providers

How is this idea attainable through the use of technology or data?

Wireless, big-data, AI, robotic, autonomous navigation and other technologies are required for location-awareness, vehicle-consumer communication, online shopping, vehicle navigation, network management, payments and so on.

Voting

Awaiting Votes
Your Ideas

Phase 3 Share your ideas! (Completed) March 19 - April 2

Smart City Connectivity – The 5G ready City by 2020

Our City will enable all actors to prosper and participate in the digital economy by integrating processes and municipal assets into the smart city planning processes. Designated zones for living labs will accelerate innovation and market development stimulating the local economy. Calgary will be a 5G ready city by 2020.

Why is this an ambitious idea?

Calgary's economy has been dependent on oil and gas resulting in fluctuations in economic prosperity. Calgary Economic Development is strengthening the diversity of Calgary's economy by attracting the technology industry. For technology industries to prosper they need rich connectivity and opportunities to innovate and municipalities can help accelerate that process. IoT, remote sensing, big data, autonomous vehicles, connected vehicles etc. are a growing industry dependent on pervasive connectivity. Today wireless carriers can take 12 - 24 months to gain access to specific assets for the deployment of wireless infrastructure. These barriers limit the growth of the connectivity ecosystem and thus slow the progress of technology development. By recognizing these barriers and working in collaboration with the wireless providers, streamlined processes can be developed that balances the needs of the municipalities and wireless providers.

How do we measure the effectiveness of this idea?

Three wireless carriers will have access to over 50 sites (poles or facilities) to deploy wireless infrastructure - Small Cell (4G/5G) by 2020 with a streamlined process that takes no longer than 45 days for permitting. Accessible connectivity and living lab zones will drive technology talent to Calgary and set the foundation for new product and industry development in a variety of fields.

How is this idea attainable through the use of technology or data?

Through principles of ""inclusion"" and ""empowerment"" an environment whereby a variety of actors can equally participate will strengthen the digital ecosystem, resulting in new opportunities for the community to develop applications. A living lab is an example of this opportunity in action. When zones around the city have been identified as areas to test new technologies it accelerates product development.

Voting

Awaiting Votes
Your Ideas